Availability: | |
---|---|
XS
ACERETECH
XS High Quality Shredder Single Shaft
The XS series shredder is a heavy duty single shaft shredder with a powerful two speed oscillating hydraulic propeller. This design prevents the occurrence of material blockages and reduces wear and tear on the internal guides. The model is welded using a special welding process. Stronger mechanical construction. The crushing capacity of the single machine is 30-40% higher than other brands. It is suitable for recycling all kinds of waste materials. The shredder is equipped with a 750 mm diameter ACERETECH effective V-rotor with a width range of 1500 mm to 3000 m. The low speed of 45 rpm ensures smooth operation with high torque. The hydraulic workstation is tightly integrated into the shredder chamber, saving space and protecting the hydraulic station for easy replacement and maintenance. XS series heavy duty single shaft shredders feature an intelligent PLC control system. The rotor can be surface hardened and wear resistant according to customer requirements. Optional water cooling systems are available for our customers depending on the characteristics of the different crushed materials.
The XS series heavy duty single shaft shredders meet customer requirements for high capacity shredding. They are widely used for wide or thick waste paper boards, refrigerator shells, large household appliance shells, everyday waste, rubber products and car tyres.
Final Products
XS High Quality Shredder Single Shaft
The XS series shredder is a heavy duty single shaft shredder with a powerful two speed oscillating hydraulic propeller. This design prevents the occurrence of material blockages and reduces wear and tear on the internal guides. The model is welded using a special welding process. Stronger mechanical construction. The crushing capacity of the single machine is 30-40% higher than other brands. It is suitable for recycling all kinds of waste materials. The shredder is equipped with a 750 mm diameter ACERETECH effective V-rotor with a width range of 1500 mm to 3000 m. The low speed of 45 rpm ensures smooth operation with high torque. The hydraulic workstation is tightly integrated into the shredder chamber, saving space and protecting the hydraulic station for easy replacement and maintenance. XS series heavy duty single shaft shredders feature an intelligent PLC control system. The rotor can be surface hardened and wear resistant according to customer requirements. Optional water cooling systems are available for our customers depending on the characteristics of the different crushed materials.
The XS series heavy duty single shaft shredders meet customer requirements for high capacity shredding. They are widely used for wide or thick waste paper boards, refrigerator shells, large household appliance shells, everyday waste, rubber products and car tyres.
Final Products
XS series | ||||
Item | Unit | XS1500 | XS2000 | XS3000 |
Feed opening | mm | 2540*1620 | 2540*2020 | 2540*2820 |
Rotor diameter | mm | 750 | 750 | 750 |
Rotor speed | rpm | 52 | 52 | 52 |
Motor power | kw | 2*75 | 2*90 | 2*132 |
Number of rotor knives | pcs | 76 | 96 | 136 |
Number of stator knives | pcs | 4 | 5 | 7 |
Hydraulic feeding ram | kw | 11 | 11 | 11 |
Standard screen | mm | 40-100 | 40-100 | 40-100 |
Chamber size | mm | 1500*1490 | 1500*1900 | 1500*2700 |
XS series | ||||
Item | Unit | XS1500 | XS2000 | XS3000 |
Feed opening | mm | 2540*1620 | 2540*2020 | 2540*2820 |
Rotor diameter | mm | 750 | 750 | 750 |
Rotor speed | rpm | 52 | 52 | 52 |
Motor power | kw | 2*75 | 2*90 | 2*132 |
Number of rotor knives | pcs | 76 | 96 | 136 |
Number of stator knives | pcs | 4 | 5 | 7 |
Hydraulic feeding ram | kw | 11 | 11 | 11 |
Standard screen | mm | 40-100 | 40-100 | 40-100 |
Chamber size | mm | 1500*1490 | 1500*1900 | 1500*2700 |
SHREDDER SPINDLES
>>>When the equipment tears high-strength materials or long working hours, the overall forging of the spindle will not break and deform.
>>>After the manufacture of professional processing equipment such as lathes and CNC machining centres, the overall error of the spindle is ensured to be no more than 0.05mm, ensuring long-term stable operation of the equipment and ensuring that the distance between the fixed and moving tools can be adjusted to at least 0.5mm.
SHREDDER CORE PILE COOLING
>>The core cooling device is designed for special materials to improve tearing efficiency, reduce the risk of spindle overheating and effectively prevent material from sticking to the spindle. to ensure stable and long-term operation.
SHREDDER BEARING HOUSING
>> Special split design ensures that the crushing chamber does not enter the bearings when working with powder, thus extending the life of the bearings. The bearings are genuine NSK roller type self-aligning bearings, ensuring that the centre can be adjusted independently when the spindle tears through the material, thus minimising the noise of the machine running.
GEARBOX OF SHREDDER
>>> Integrated box design, stronger mechanism, stronger output shaft and bearing design, longer service life and greater torque.
>>> Flexible cooling mode to meet the requirements of thermal power
>>> At the same time, the output shaft adopts double oil seal design, which greatly reduces the risk of oil leakage.
MOTOR OF SHREDDER
>>> The main motor adopts Weg / Siemens brand motor, with stable output and reliable quality.
HYDRAULIC STATION
>>> The motor, oil pump and valve group of the hydraulic station are all made of Taiwan brand, with reliable quality. The system is equipped with or150 water cooler, which can effectively control the oil temperature below 55 ° C.
SHOCK ABSORBER OF SHREDDER
>>> Polyurethane shockproof design can effectively remove the vibration generated during the operation of the equipment and protect the reducer and bearing from the vibration.
CHAMBER OF SHREDDER
>>> The silo adopts circular arc design, which not only increases the internal space, but also increases the pushing efficiency. The circular pushing design can also effectively prevent material leakage in the working process, and use the bearing swing to avoid the wear of guide rail caused by material blockage. The silo is provided with electrical and mechanical double protection, which can protect personal safety to the greatest extent during maintenance.
CONTROL SYSTEM OF SHREDDER
>>> The electrical system adopts microcomputer PLC programming control and whole process automation. After commissioning, the operator only needs to press start and stop. Save labor costs and ensure the safety of the operating environment.
SHREDDER SPINDLES
>>>When the equipment tears high-strength materials or long working hours, the overall forging of the spindle will not break and deform.
>>>After the manufacture of professional processing equipment such as lathes and CNC machining centres, the overall error of the spindle is ensured to be no more than 0.05mm, ensuring long-term stable operation of the equipment and ensuring that the distance between the fixed and moving tools can be adjusted to at least 0.5mm.
SHREDDER CORE PILE COOLING
>>The core cooling device is designed for special materials to improve tearing efficiency, reduce the risk of spindle overheating and effectively prevent material from sticking to the spindle. to ensure stable and long-term operation.
SHREDDER BEARING HOUSING
>> Special split design ensures that the crushing chamber does not enter the bearings when working with powder, thus extending the life of the bearings. The bearings are genuine NSK roller type self-aligning bearings, ensuring that the centre can be adjusted independently when the spindle tears through the material, thus minimising the noise of the machine running.
GEARBOX OF SHREDDER
>>> Integrated box design, stronger mechanism, stronger output shaft and bearing design, longer service life and greater torque.
>>> Flexible cooling mode to meet the requirements of thermal power
>>> At the same time, the output shaft adopts double oil seal design, which greatly reduces the risk of oil leakage.
MOTOR OF SHREDDER
>>> The main motor adopts Weg / Siemens brand motor, with stable output and reliable quality.
HYDRAULIC STATION
>>> The motor, oil pump and valve group of the hydraulic station are all made of Taiwan brand, with reliable quality. The system is equipped with or150 water cooler, which can effectively control the oil temperature below 55 ° C.
SHOCK ABSORBER OF SHREDDER
>>> Polyurethane shockproof design can effectively remove the vibration generated during the operation of the equipment and protect the reducer and bearing from the vibration.
CHAMBER OF SHREDDER
>>> The silo adopts circular arc design, which not only increases the internal space, but also increases the pushing efficiency. The circular pushing design can also effectively prevent material leakage in the working process, and use the bearing swing to avoid the wear of guide rail caused by material blockage. The silo is provided with electrical and mechanical double protection, which can protect personal safety to the greatest extent during maintenance.
CONTROL SYSTEM OF SHREDDER
>>> The electrical system adopts microcomputer PLC programming control and whole process automation. After commissioning, the operator only needs to press start and stop. Save labor costs and ensure the safety of the operating environment.
Add:18# Yuefeng road, Nanfeng town, Zhangjiagang city. Jiangsu province, China
Copyrights 2022 Jiangsu Aceretech Machinery Co., Ltd. All rights reserved. sitemap | support by Leadong
ICP备案号:苏ICP备2022010828号-1