FEEDING
>>For automatic feeding of plastic flakes, the screw loader and screw feeder are equipped with an ASE single-screw extruder.
>>>As a standard design, the plastic flakes are fed to the screw feeder through the screw loader; we can also install magnetic frames in the screw loader storage silo as an option to prevent the presence of metal inside the material.
>>>The feeder motor is controlled by ABB/Schneider inverter; the level sensor installed in the screw feeder hopper helps to achieve automatic filling.
Translated with www.DeepL.com/Translator (free version)
PLASTICIZING AND DEGASSING
>> A special single-screw extruder for gentle melting of crushed plastic chips. Capacity range is 150-1000kg/h.
>>>The extrusion part consists of high torque gear box, motor, screw and barrel, vacuum degassing system.
>>>The screw and barrel are made of bimetal material for longer service life.
>>>Ceramic heater is installed on the barrel as standard heater for heating and melting plastic scrap, and blower for cooling the barrel.
SECOND STAGE EXTRUDER
>> With this second stage extruder, you will implement another vacuum degassing system between the two stages of extrusion, which removes most of the high printing from the material. In addition, there will be another filtration system at the end of the second stage extruder, which facilitates the recovery of highly contaminated material.
MELT FILTRATION
>>>Plate screen changer for low MFI materials, such as HDPE pipe flakes, non-stop, low cost, screen changer diameter can be from 120mm to max 400mm.
>>>Piston screen changer, filter area up to 3000cm2, suitable for industrial waste plastics recycling.
>>>SCF screenless filter, no need to replace the screen, automatic discharge of impurities, continuous working system with high efficiency.
PELLETIZING SYSTEM
>>For different materials and different usage scenarios, we can provide you with different pelletizing systems.
Water ring pelletizing systems.
Standard pelletizing methods in ASE systems.
Automatic adjustment of the pelletizing head.
RPM of the rotating blades is automatic.
PELLETIZING SYSTEM
>>Underwater pelletizing system.
Suitable for large capacity, automatic, and
Suitable for a wider range of materials.
PELLETIZING SYSTEM
>>Water stock pelletizing system.
Cost-effective
Suitable for materials with MFI greater than 8.
VIBRATORY DRYER AND PACKAGING SYSTEM
>>Advanced dewatering vibrating screen combined with horizontal centrifugal dewatering provides high performance dried pellets and low energy consumption. The moisture of the dried pellets can be controlled to within 1%.
CONTROL CABINET
>>Inverter: ABB/Schneider.
*One button "Start"
*One-touch "stop"
*Emergency stop.
*Protection switch
