>>> For automatic feeding of plastic flakes, screw feeders and screw loaders are equipped with ASE single screw extruders.
>>> As a standard design, the plastic flakes are fed from the screw loader to the screw feeder. We can also install magnetic frames in the screw loader storage bin to prevent the material from containing metals.
>>> Feeding motor is controlled by ABB/Schneider frequency converter. Level sensor installed in the hopper of the screw feeder for automatic feeding.
Plasticizing and Degassing
>>> Specialized single-screw extruders are suitable for gentle.
Melting of crushed plastic chips. Capacity range from 150-1000kg/h.
>>> Extrusion section consists of high torque gear box, motor, screw barrel, vacuum degassing system.
>>> Ceramic heater is installed on the barrel as standard heater to heat and melt plastic scrap, and blower to cool the barrel. Optional infrared heater is available, easy to disassemble and install, fast heating speed and energy saving. More efficient heat transfer. Longer service life. Lower energy, higher output capacity.
Melt Filtration
>>> Plate type screen changer for low MFI materials such as HDPE pipe sheets, no downtime, low cost, screen changer diameter range from 120mm to max 400mm.
>>> Piston type screen changer with filter area up to 3000cm2 for industrial waste plastics recycling.
>>> SCF screenless filter, no need to replace the screen, automatic discharge of impurities, continuous working system with high efficiency.
Pelletizing System
>>>For different materials and different usage scenarios, we can provide you with different pelletizing systems.
>>> The die surface water ring pelletizing system is the standard pelletizing method of ASE system. The pneumatic device controls the good contact between the blade and the die plate to ensure uniform pellets. The rotation speed of the rotating blade is automatically adjusted according to the melt extrusion pressure.
Pelletizing System
>>> Underwater pelletizing system.
Suitable for large capacity, automatic.
Wide range of applicable materials.
Pelletizing System
>>> Water-drawn pelletizing systems.
Cost-effective.
Suitable for materials with MFI > 8.
Vibratory Dryer and Packaging System
>>> Advanced dewatering vibrating screen combined with horizontal centrifugal dewatering presents high performance dried pellets and lower energy consumption.
>>> Dried pellets can be controlled to within 1% moisture.
Control Cabinet
>>> Inverter: ABB/Schneider.
* One button "Start
* One button "Stop"
* Emergency stop.
* Protection switch
* Precise temperature control, optimized plasticizing design, ensuring reliable pellet quality.
