+86 13812852226    |         sales@aceretech.com
Home » Product » Plastic Pelletizing Machine » Ce ISO Certificates Plastic Pellet Machine


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Ce ISO Certificates Plastic Pellet Machine

  • Pelletizing Series


Ce ISO Certificates Plastic Pellet Machine

Various Plastics PE PP Film Recycling Compacting & Pelletizing Granulator Machine With Manufacturer Price

ACS-H Compacting & Pelletizing system
3 in 1 integrated recycling system
Size reduction, pre-heating and pelletizing, 3 in 1 integrated system, less cost.
More effective and stable system for plastics of low bulk density.
Higher output and lower energy consumption.
Lower investment for a higher performance machine.
Standard production and management in the workshop.
Combines size reduction, plasticization and pelletizing in an integrated system.
Qualified for soft plastics as well as rigid flakes with innovative special design.

Machine size Data of Compactor Data of Single Screw Extruder Capacity
Efficiency Volume
Motor power
Dia of screw
L/D Motor power
ACS-H 300/80 300
45/55 160-220
ACS-H 500/100 500
36 90/110 300-380
ACS-H 800/120 800
36 132 450-480
ACS-H 1000/140 1000
36 160/185 500-650
ACS-H 1200/160 1200
34 220/250 800-1000
ACS-H 1400/180 1400
180 34 315


ACSS Compacting & Pelletizing system

The acss series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to one step.applied in the plastics recycling and pelletizing process.

Machine size Screw diameter
L/D Motor power
ACSS-H80/120 ACS-H300/80 80 36
45/55 160-220
ASE120 120
10 22
ACSS-H100/120 ACS-H500/100 100
90/110 300-380
ASE120 120
10 30
ACSS-H120/150 ACS-H800/120 120
36 132
ASE150 150 10 37
ACSS-H140/150 ACS-H1000/140 140
160/185 500-650
ASE150 150
10 45
ACSS-H160/180 ACS-H1200/160 160
34 220/250 800-1000
ASE180 180 10 55
ACSS-H180/200 ACS-H1400/180 180
34 315
ASE200 200
10 75



Excellent degassing and filtering performance for recycling

The ACS-Pro is the entirely new standard recycling and pelletizing system with optimized super long L/D ratio, filtering ahead of vacuum degassing, specially suit to the waste plastics such as high contaminated and heavily printed recycling and pelletizing.

The drive of compactor controlled by inverter, together with sliding gate device installed on the outlet of compactor room, to guarantee ACS-Pro not only handle loosing material recycling but also rigid regrinds material re-pelletizing.

Machine size Output Capacity for Common Materials(for reference)
max min
max min max min max min max
ACS-Pro 1008 400            
450 450
550 500
ACS-Pro 1414 900   
900 850
1000 850
1100 900


ASPTM SHREDDIng & Pelletizing system

Suitable to both light/rigid plastic recycles;

Easier operation;

Smaller space occupation;

Intelligence: One-button start/stop;

25% Lower energy comsuption

The ASP series shredding and pelletizing system combines function of shredding, crushing, enforcing feeding, plasticization and pelletizing in one system.

Applied in the plastics recycling and pelletizing process, ASPTM system is a integrated and cost-saving solution for every kind of plastic scrap, such as film, raffia, trim, purge, hollow part, bottle and foaming material in plant recycling.

Machine size Data of Shredder Data of single screw extruder Capacity
Rotor width
Rotor dia.
Screw dia.
L/D Motor Power
ASP500/80 500
320 80
36 90


ASE-H REGRINDIng & Pelletizing system

Rigids Recycling Machine Pellet Quality Ensured

The ASE-HTM series single screw extrusion and pelletizing system, is a specialized and reliable system, suitable to the recycling and re-pelletizing job of rigid plastic scrap. It is an efficiency and continuous system that makes rigid plastics, such as flakes, regrinds, crushed plastics into granules again with gentle re-melting, significant volatilization and impurities-filtration.

Machine size Dia of screw
L/D Motor power
ASE80 80
ASE100 100
32 110
ASE120 120
32 132
ASE140 140
32 185
ASE160 160
ASE180 180
32 250/315 800-1000


ADS REGRINDIng & Pelletizing system
The ADS series single screw extrusion and pelletizing system is a specialized and reliable system, suitable to the recycling and re-pelletizing job of rigid plastic scrap.

It combines function of plasticization and pelletizing to one step and is ideal for crushed regrinds or flakes of PE/PP/ABS/PS/HIPS/PC etc.
Final productions produced by ADS single screw extrusion line are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion cand plastics injection,etc.
Machine Model ADS
Target Recycled Material HDPE,LDPE,PP,BOPP,CPP,OPP,PA,PC,PS,PU,ABS Final Product Shape: Particles
Final Product Shape Particles
System composition Screw Loader, Single Screw Extruder, Filtration first, Vacuum Degassing, Pelletizer, Water Cooling Device, Dehydration Section,
Conveyor Fan, Product Silo.
Output Range 320kg/h-2100kg/h
Feeding Device Belt Conveyor (Standard), Roll Hualing off device (Optional)
Diameter of screw 100mm-180mm
Material of screw Bimetal
L/D of screw 50/ 1
Heater of barrel Ceramic heater or Far-infrared heater
Cooling of Barrel Air cooling of fans through blowers
Vacuum deashing exhaust Two Double-zone vacuum degassing system (Standard)
Pelletizing type Water-ring pelletizing/ water-strands pelletizing/ Under-water pelletizing
Voltage Standard According to the Voltage of the Customer's Location
Optioanl device Metal detector, Roll hualing off device, Masterbatch and additives feeder
Warranty 13 months from the date of bill of lading
Technical services project design, factory construction, installation and recommendations, commissioning


ATE Twin Screw Extrude
ATE Twin-screw: Modular design for recycling, extrusion, compounding.
ATE Series Co-rotating Parallel Twin Screw Extruder consists of motor drive, torque distribution gearbox, processing section, temperature controlling units, diesection and down-stream pelletizing system, etc.
ATE Twin Screw Extruder adopts modular design principle, component standardization manufacturing, which can present stable and reliable
Thanks to the modular principle, ATE extruderscan provide highly customizable solutions according to customers' process and special requirements. Based on different output torque grade, ATE series extruders have basic type and efficiency type.

Machine size Dia of screw
L/D Motor power
ATE65 62.4 40
90 200-300
ATE75 71 40 132 300-500
ATE95 93 40 315 500-800


SCF series disc-type self-cleaning filtration system

Non-mesh design

The new SCF self-cleaning filtration system makes non-stopping recycling extrusion, especially suitable to highly contaminated materials re-pelletizing. Different from traditional screen changers, which requires timely change the dirty wire mesh, the SCF system will present continuous filtering performance, and remove the contaminates from the surface of steel screen plate automatically.

The SCF filtration system consists of hardened steel screen plate, rotating unit, hydraulic section, contaminates removing blades and discharging screw.

UP TO 5%

SCF filtration system can handle and remove up to 5% contaminates in the melt flowing, can separate the contaminates as: paper, wood, aluminum, unmelted plastic and rubbers etc.

SCF typical features

Non wire-mesh required, long using life of disc screen plate;

Reliable Continuous Filtration with stable pressure;

Self-cleaning job done in the filtering room, friendly to the environment and not pollute the air;

Filtering accuracy can reach 120μm, can handle and remove up to 5% contaminates;

Less back-pressure in the filtering room thanks to short flowing channel and big filtering area;

Larger filtering area, up to 2.32 million mirco-drilled holes;

Automatically wiping action to assure constant self-cleaning of screen plate;

Type SCF 350 SCF 350-D SCF 500-D
Diameter 350mm * 1 350mm * 2 500mm * 2
Filtration area 961cm² 1922cm² 3924cm²
Filtration fineness(mesh) 40-120 40-120 40-120
Filtration fineness(um) 120-380 120-380 120-380
Hole shape Cylinder/Cone Cylinder/Cone Cylinder/Cone
Processing technic CNC/Laser CNC/Laser CNC/Laser
Max. melt pressure 200bar 200bar 200bar
Max. melt difference 150bar 150bar 150bar
Throughput capacity 200-500kg/h 500-1000kg/h 800-2000kg/h
Rotation motor power 2.2kw 2.2kw 3kw
Discharge screw motor power 0.37kw 0.37kw*2 0.55kw*2
Heating power 28kw 33kw 48kw
Dirt discharge Screw Screw Screw
PLC Siemens Siemens Siemens
Inverter Schneider/ABB Schneider/ABB Schneider/ABB


Plastic Recycling Machine(Click The Key Words to See More Quality Products)
Plastic pelletizing machine Shredder
Plastic Washing Line Pulverizer  Machine


Product Category

Quick Quote


Quick Links

Product Category

Contact Us

Add:18# Yuefeng road, Nanfeng town, Zhangjiagang city. Jiangsu province, China

Tel: +86-512-58622021
Email: sales@aceretech.com
Quick Quote

  Copyrights 2022 Jiangsu Aceretech Machinery Co., Ltd.  All rights reserved.       sitemap | support by Leadong